BELLE EPOQUE COLLECTION
PATTERN RÊVE PARISIEN
 |
Dimensions about 70×470 mm about 200×200 mm Thickness 11/14 mm |
 |
4 mm Top layer 7/10 mm Birch multi-layer |
| INTEGRATION WITH COLLECTIONS: LIFE COLLECTION > EUROPEAN WALNUT | |||
RÊVE PARISIEN EXAMPLES
PATTERN LOUVRE
 |
Dimensions about 170×200 mm Thickness 14 mm |
|
4 mm Top layer 10 mm Birch multi-layer |
| INTEGRATION WITH COLLECTIONS: LIFE COLLECTION | |||
LOUVRE EXAMPLES
PATTERN EIFFEL
 |
Dimensions about 140×380 mm Thickness 14 mm
|
|
4 mm Top layer 10 mm Birch multi-layer |
|
The EIFFEL pattern is suitable for a variety of different installing solutions. INTEGRATION WITH COLLECTIONS: LIFE COLLECTION |
|||
EIFFEL EXAMPLES
PATTERN MONTMARTRE
 |
Dimensions about 230×200 mm Thickness 14 mm
|
|
4 mm Top layer 10 mm Birch multi-layer |
| INTEGRATION WITH COLLECTIONS: LIFE COLLECTION | |||
MONTMARTRE EXAMPLES
PATTERN MATISSE
 |
Width 200 mm Length 800 / 900 mm Thickness 16 mm
|
 |
4 mm Top layer 8 mm Fir 4 mm Fir |
| INTEGRATION WITH COLLECTIONS: LIFE COLLECTION, IDENTITY COLLECTION > NATURAL OAK | |||
MATISSE EXAMPLES
At each supply of our products we issue a certificate that declare the production made in Italy.
(See document)
Formaldehyde
Full compliance with requirements of Class E1
Flame Retardant Certification
Class 1 flame retardant varnishing available on request
CE Marking
Full compliance with CE marking requirements
Manufactured entirely in Italy
Installation instructions
Installation on marble/ceramic/cement or similar subfloor, and multilayer panels or chipboards.
Adhesive for the laying process
Adhesive bi-component (A (9KG) + B (1KG) or mono-component (water free) covering the whole laying surface.
Room temperature during the installation process
Near the parquet wood flooring, it’s advisable to keep the air’s Relative Humidity at 50-60% and the temperature to not be less than 16°C.
Humidity levels of the flooring
The R.H of the base must not exceed 2% in weight. In cases of hydronic radiant flooring, it must not exceed 1,7% in weight and the refrigerant circuit must be turned on 15 days before installation of the wood.
Post–installation instructions
Clean the eventual remainder of adhesive off the floor, with a special vacuum cleaner designed for pre-finished flooring, covering the whole surface.
Cleaning instructions
For everyday cleaning use an electrostatic dust mop.
For better maintenance of the wood floor use a well wrung out damp cloth.